MOTUL 8100 X-clean EFE 5W-30 has synthetic base stocks coupled with specific friction modifier molecules and dedicated SAPS levels that generate outstanding oil film resistance, reduce friction in the engine. Viscosity at 100☌ (212☏) ASTM D445 12.1 mm²/s The ACEA C2 standard requires significant reduction of friction to ensure gains in energy savings, and therefore fuel economy benefits. Before using, always refer to the owner’s manual or handbook of the vehicle.Do not mix with lubricants not ACEA C3 or ACEA C2 compliant.Drain interval: according to manufacturers’ recommendations and tuned to your own use.Always refer to the owner’s manual if in doubt. May be unsuitable for use in some engines.Compatible with catalytic converters (CAT) and Diesel Particulate Filters (DPF).Suitable when a “Fuel Economy” lubricant is required: ACEA C2 standard.a low friction, low HTHS (≥ 2.9 mPa.s) viscosity and “Mid SAPS” oil with reduced content of Sulfated Ash (≤ 0.8%), Phosphorus (≤ 0.09%) and Sulphur (≤ 0.3%). high HTHS (> 3.5 mPa.s) viscosity and “Mid SAPS” with reduced content of Sulfated Ash (≤0.8%), Phosphorus (0.07% ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%), or an ACEA C2 engine oil i.e. ![]() Specially designed for the latest generation cars, powered by Gasoline and Diesel engines, naturally aspirated or turbocharged, direct or indirect injection.įor vehicles that are Euro 4, 5 or 6 emission regulation compliant and require an ACEA C3 engine oil i.e. Approved by OEMs such as BMW Group, GM (General Motors) OPEL, MERCEDES and VW for its EFE – Extra Fuel Economy – property. Motul 8100 xclean EFE 5W30 is a high performance 100% Synthetic lubricant specifically designed for powerful and recent cars fitted with large displacement engines, Gasoline and direct injection turbo Diesel.Īdvanced 100% Synthetic lubricant that provides at the same time High Protection and Fuel Economy.
0 Comments
Leave a Reply. |